When others are fighting to improve their vocational ability, if you still making no progress and take things as they are, then you will be eliminated. In order to stabilize your job position, you need to constantly improve your professional ability and keep up with the pace of others to let you not fall far behind others.Whole Passtcert pertinence Cisco Certification 300-360 WIDESIGN exam sample questions are very popular. Passtcert Cisco Certification 300-360 WIDESIGN exam sample questions can not only let you obtain IT expertise knowledge and a lot of related experience, but also make you be well prepared for the exam. Although Cisco certification 300-360 exam is difficult, through doing Passtcert Cisco Certification 300-360 WIDESIGN exam sample questions you will be very confident for the exam.
Share some CCNP Wireless 300-360 exam questions and answers below.
After the completion of a site survey with Ekahau Site Survey tool, using the default color palette, it is noted that multiple areas are shown as white on the heat map when viewing 5 GHz signal strength data.
What does this indicate about the signal strength?
A. The area is below the minimum threshold configured on the tool.
B. The area is below the detectable level and indicates no RF signal.
C. The area is below -100 dBm at coverage cell edge.
D. The area is below -67 dBm at coverage cell edge.
Answer: A
An engineer is planning for a 24 Mbps data rate for a new installation.
What is the coverage area from the AP if the environment and other factors are not taken into consideration?
A. 225 feet
B. 80 feet
C. 150 feet
D. 100 feet
Answer: B
A Cisco 7925 phone at a client¡¯s location is not registering with CUCM. The engineer analyzes a packet capture, sees that the phone receives an IP, and downloads the proper configuration file from TFTP successfully.
What type of messages should the phone be sending at this point?
A. H.245
B. H.323
C. MCGP
D. SCCP
Answer: D
A network engineer is preparing for an office site survey with a height of 2.5 meters. Which three components are recommended to complete the survey? (Choose three.)
A. Use APs with external antennas.
B. Use DoS attack on APs while measuring the throughput.
C. Use APs with built-in antennas.
D. Use a battery pack to power APs.
E. Use a drawing of the office space to draw AP and client placements.
F. Use APs with directional antennas.
Answer: C,D,E
An engineer is planning for a 24 Mbps data rate for a new installation. What is the coverage area from the AP if the environment and other factors are not taken into consideration?
A. 225 feet
B. 80 feet
C. 150 feet
D. 100 feet
Answer: B
The AP has been configured property for a VoWLAN survey The RF environment contains a noise of -87 to -90 dBm. What is the target value for the cell edge reading?
A. -62 dBm
B. -67 dBm
C. -60 dBm
D. -70 dBm
Answer: A
The AP has been configured property for a VoWLAN survey The RF environment contains a noise of -87 to -90 dBm.
What is the target value for the cell edge reading?
A. -62 dBm
B. -67 dBm
C. -60 dBm
D. -70 dBm
Answer: B
If you purchase the Cisco Certification 300-360 WIDESIGN exam sample questions we provide, you can pass Cisco certification 300-360 exam successfully. How to get to heaven? Shortcart is only one. Which is using Passtcert Cisco Certification 300-360 WIDESIGN exam sample questions. This is the advice to every IT candidate, and hope you can reach your dream of paradise.If you're still studying hard to pass the CCNP Wireless 300-360 exam, Passtcert help you to achieve your dream.
So what are you waiting for? Go to buy Passtcert Cisco Certification 300-360 WIDESIGN exam sample questions please, and with it you can get more things what you want.Passtcert is a professional IT certification sites, the certification success rate is 100%. This number is proved by candidates through practice. Because Passtcert has a strong IT team of experts, they are committed to study exam questions and answers, and serve the vital interests of the majority of candidates.
Related article: http://200-310-qa.blogspot.com/2017/09/update-designing-cisco-wireless.html
Share some CCNP Wireless 300-360 exam questions and answers below.
After the completion of a site survey with Ekahau Site Survey tool, using the default color palette, it is noted that multiple areas are shown as white on the heat map when viewing 5 GHz signal strength data.
What does this indicate about the signal strength?
A. The area is below the minimum threshold configured on the tool.
B. The area is below the detectable level and indicates no RF signal.
C. The area is below -100 dBm at coverage cell edge.
D. The area is below -67 dBm at coverage cell edge.
Answer: A
An engineer is planning for a 24 Mbps data rate for a new installation.
What is the coverage area from the AP if the environment and other factors are not taken into consideration?
A. 225 feet
B. 80 feet
C. 150 feet
D. 100 feet
Answer: B
A Cisco 7925 phone at a client¡¯s location is not registering with CUCM. The engineer analyzes a packet capture, sees that the phone receives an IP, and downloads the proper configuration file from TFTP successfully.
What type of messages should the phone be sending at this point?
A. H.245
B. H.323
C. MCGP
D. SCCP
Answer: D
A network engineer is preparing for an office site survey with a height of 2.5 meters. Which three components are recommended to complete the survey? (Choose three.)
A. Use APs with external antennas.
B. Use DoS attack on APs while measuring the throughput.
C. Use APs with built-in antennas.
D. Use a battery pack to power APs.
E. Use a drawing of the office space to draw AP and client placements.
F. Use APs with directional antennas.
Answer: C,D,E
An engineer is planning for a 24 Mbps data rate for a new installation. What is the coverage area from the AP if the environment and other factors are not taken into consideration?
A. 225 feet
B. 80 feet
C. 150 feet
D. 100 feet
Answer: B
The AP has been configured property for a VoWLAN survey The RF environment contains a noise of -87 to -90 dBm. What is the target value for the cell edge reading?
A. -62 dBm
B. -67 dBm
C. -60 dBm
D. -70 dBm
Answer: A
The AP has been configured property for a VoWLAN survey The RF environment contains a noise of -87 to -90 dBm.
What is the target value for the cell edge reading?
A. -62 dBm
B. -67 dBm
C. -60 dBm
D. -70 dBm
Answer: B
If you purchase the Cisco Certification 300-360 WIDESIGN exam sample questions we provide, you can pass Cisco certification 300-360 exam successfully. How to get to heaven? Shortcart is only one. Which is using Passtcert Cisco Certification 300-360 WIDESIGN exam sample questions. This is the advice to every IT candidate, and hope you can reach your dream of paradise.If you're still studying hard to pass the CCNP Wireless 300-360 exam, Passtcert help you to achieve your dream.
So what are you waiting for? Go to buy Passtcert Cisco Certification 300-360 WIDESIGN exam sample questions please, and with it you can get more things what you want.Passtcert is a professional IT certification sites, the certification success rate is 100%. This number is proved by candidates through practice. Because Passtcert has a strong IT team of experts, they are committed to study exam questions and answers, and serve the vital interests of the majority of candidates.Related article: http://200-310-qa.blogspot.com/2017/09/update-designing-cisco-wireless.html
Comments
Post a Comment